Articles:

In collaborative design processes, if you can achieve this kind of focus on the purpose of the work and the people who create the value; bringing together client, design disciplines, stakeholders, and experts; each with their ideas, concerns, knowledge, creativity, and humility, therein lies the opportunity for exquisite outcomes..

For example, migrating to ASHRAE A1 Allowable temperature range from ASHRAE A1 Recommended during peak external ambient conditions could reduce OPEX considerably.. ASHRAE Environmental Classes (Allowable) for Data Centres.Hot and cold aisle separation is standard in all new data centres, however, improved air flow management and hot aisle containment (HAC) leakage reduction can have a positive improvement on air temperatures in the room.. Air Side Economisers.

In data centres operating within ASHRAE A1 Allowance temperature and located in colder/dryer climates, direct evaporative coolers (DEC) are a highly efficient solution, however, they utilise a larger footprint on the site.These systems can potentially operate in free cooling mode year-round, leveraging both dry and adiabatic cooling based on external conditions.This can translate to low reliance on mechanical cooling and potentially exceptional PUE values..

Using water for adiabatic cooling allows the unit to cool the air close to the wet bulb temperature of the ambient air as opposed to the dry bulb temperature (dry cooling).Due to the wet bulb temperature being often many degrees below coincident dry bulb temperature, in high dry bulb conditions this can mitigate the requirement for mechanical cooling.. Data Centre with DEC unit.

Chilled water system flexibility.

The most common systems installed in data centres use chilled water as the medium between the internal and external units.Clearly, it is fine to narrow down a set of options on a rational basis.

But if it's simply that we don't have time, we are at risk of staying away from the optimum solution.That means more cost and more time which, ultimately, is going to affect the patient who is at the end of that supply chain.

As a result, these are particularly important factors to consider in the design and construction of pharmaceutical facilities..In summary, Chips allow us many different perspectives on parts of a project.